• Medical Diagnostic Equipment
  • Surgical and Therapeutic Equipment
  • Medical Furniture
  • Laboratory Equipment
  • Cleaning and Sterilization

Black Stone BL 7916 pH controller/pump system

The Blackstone BL 7916 pH  controller and  pump from Hannah Instruments is a compact system combining a pH controller and a proportional dosing pump, designed for precise pH control in industrial applications. Manufactured by Hanna Instruments, this device features an LCD display, configurable proportional dosing for acid or base, and an integrated safety alarm. Thanks to its robust construction, high chemical resistance and flexible installation options, the BL 7916 ensures reliable and continuous monitoring of sensitive chemical processes. It is ideal for water treatment industries, laboratory installations and environments requiring rigorous pH control.



Description

Black Stone BL 7916 pH control and pump system: intelligent pH control in a robust housing

The Black Stone BL 7916 pH controller and pump is an all-in-one solution designed to automate and secure pH control in industrial and laboratory processes. Manufactured by Hanna Instruments, this system combines continuous pH measurement with an integrated proportional dosing system, ensuring precise and constant adjustment of the desired pH level without manual intervention.

Two variants are available in this range: the BL 7916D model, designed for a 230 V power supply, and the BL 7916U model, designed for a 115 V power supply. Apart from this difference in power supply voltage, the two models are identical in all technical and functional respects, offering the same performance and features.

The device features a simple interface, an intuitive LCD display and a front control panel, providing direct access to calibration settings, setpoint adjustment and acid/base selection. Thanks to an electromagnetic solenoid dosing system, it offers stable, quiet and reliable performance over the long term.

The BL 7916 is designed to operate in demanding conditions. Its single-piece, injection-moulded polypropylene housing is waterproof, robust and chemically resistant, protecting the internal components from moisture, splashes and corrosion. The transparent cover allows visual inspection while protecting the adjustment elements.

The device has a built-in alarm that is triggered if the measured pH value deviates by more than ±2 units from the set point, allowing rapid intervention in the event of a malfunction or sudden change in the composition of the liquid. It also offers auxiliary contacts to control other external devices (mixers, backup pumps, etc.) and an isolated 4-20 mA analogue output for remote recording or monitoring.

Installation is simple. It can be mounted directly on a wall or tank, close to the injection point, ensuring minimal pressure loss and a fast system response. Its compatibility with a wide range of chemicals makes it a universal and versatile device, suitable for many industrial sectors.

Maintenance is simple thanks to easily accessible components, available spare parts and clearly indicated recommended preventive maintenance. The BL 7916 is a reliable and high-performance ally for all environments where pH stability is essential to process quality.

Features

  • Integrated controller and dosing pump
  • Proportional acid or base dosing (selectable)
  • LCD screen for pH reading and configuration
  • pH calibration with trimmers (offset and slope)
  • Automatic alarm in case of deviation > ±2 pH
  • Selection between measurement and configuration mode (SET/MEASURE)
  • Isolated 4-20 mA output for monitoring
  • Auxiliary dosing contact (e.g. agitator)
  • Overheating protection
  • Chemical-resistant polypropylene housing
  • IP protection for industrial environments
  • Easy installation: wall-mounted or tank-mounted
  • BNC for pH electrode
  • Compatible with Pt100 temperature probe (compensation)

Technical Details

  • BL 7916D
    • pH measurement range: 0.00 to 14.00 pH
    • Resolution: 0.01 pH
    • Accuracy (@20 °C): ±0.01 pH
    • Typical EMC deviation: ±0.1 pH
    • Input impedance: 10¹² Ohm
    • Dosing type: Proportional (acid or base, selectable)
    • Recording output: 4 to 20 mA (optically isolated)
    • Dosing contact: Isolated, 2 A max, 240 V, resistive load, service life 1,000,000 cycles
    • Alarm contact: Isolated, 2 A max, 240 V, resistive load, service life 1,000,000 cycles
    • Pump flow rate: 13.3 L/h at 0.5 bar
    • pH calibration:
      • Offset: ±1 pH via trimmer
      • Slope: 85 to 115% via trimmer
    • Power supply: 230 Vac ±15%, 50/60 Hz (40 W)
    • Environmental conditions: 0 to 50 °C; max. RH 95%, non-condensing
    • Dimensions: 221 x 142 x 181 mm
    • Weight: approx. 5 kg

---

  • BL 7916U
    • pH measurement range: 0.00 to 14.00 pH
    • Resolution: 0.01 pH
    • Accuracy (@20 °C): ±0.01 pH
    • Typical EMC deviation: ±0.1 pH
    • Input impedance: 10¹² ohms
    • Dosing type: Proportional (acid or base, selectable)
    • Recording output: 4 to 20 mA (optically isolated)
    • Dosing contact: Isolated, 2 A max, 240 V, resistive load, service life 1,000,000 cycles
    • Alarm contact: Isolated, 2 A max, 240 V, resistive load, service life 1,000,000 cycles
    • Pump flow rate: 13.3 L/h at 0.5 bar
    • pH calibration:
      • Offset: ±1 pH via trimmer
      • Slope: 85 to 115% via trimmer
    • Power supply: 115 Vac ±15%, 50/60 Hz (40 W)
    • Environmental conditions: 0 to 50 °C; max. RH 95%, non-condensing
    • Dimensions: 221 x 142 x 181 mm
    • Weight: approx. 5 kg

Compatible Accessories


  • 7 mA LDPE tube
  • Suction and discharge valves
  • Pipe connectors
  • HI 721005: Foot valve
  • HI 721004: Injection valve
  • HI 720032: LDPE tubing, 100 m roll
  • HI 721102 / HI 721103: Discharge/suction valves
  • HI 721008: Ceramic weights
  • pH calibration solutions (HI 7004M, HI 7007M, etc.)
  • Cleaning and storage solutions (HI 70300, HI 7061)
  • Recommended electrodes: HI 1110S, HI 1130B/3, HI 1114S, etc.

Discover more in this category

Logistics

Remma and its partners provide you with serviced and configured equipment tailored to your needs. Receive your product at your facility with standard or express delivery, and an installation option, all through a single point of contact.

Warranty

Our 12/24-month warranty ensures the safety and reliability of your medical equipment throughout its lifespan.

Flexible Financing

Settle your medical equipment in up to 36 installments with our financing service or pay after delivery with Remma Facility.