Electrosurgical analyzer QA-ES II - Perfect Condition

Fluke QA-ES II A Precision Electrosurgical Analyzer

The Fluke Biomedical QA-ES II is an essential tool for medical service technicians. This electrosurgical analyzer is specifically designed to perform precise tests on high-frequency electrosurgical units (ESU), ensuring compliance with national and international standards. With its advanced capabilities, the QA-ES II can automatically measure power distribution, crest factor, RF leakage, and test the return electrode monitor (REM).

The device features a graphic LCD display that shows messages, test results, and function menus. Results can be printed directly or transferred to a PC using the Ansur QA-ES Plug-in test automation software, allowing for efficient data management and storage. The QA-ES II can operate in manual or programmable modes, offering greater flexibility for users.

Safety is a top priority with the QA-ES II. The device is designed to prevent electrical shock hazards and should be used in accordance with the user manual's instructions. It is important not to open the device and to use it only in appropriate environments, adhering to published specifications.

The QA-ES II is a robust and reliable tool, manufactured in Norway for Fluke Biomedical. It is built to withstand rigorous usage conditions, with an operating temperature range of 15°C to 35°C and a maximum humidity of 80% non-condensing. The device is also easy to clean, requiring only a damp cloth with mild detergent.

The Fluke Biomedical QA-ES II is a high-quality electrosurgical analyzer offering advanced features for ESU testing. It is ideal for qualified service technicians seeking to ensure the performance and safety of medical equipment.

• Operating Temperature: 15°C to 35°C
• Storage Temperature: 0°C to 50°C
• Humidity: 80% non-condensing
• Display: Graphic LCD, 8 lines, 40 characters, 240 x 64 pixel graphics mode
• Controls: Function keys F1 to F5, ENTER, CANCEL, and encoder
• Interfaces: Parallel printer port; bi-directional RS232 for computer control
• Power: 115/230 VAC, 48 to 66 Hz, 35 VA
• Dimensions: Height 13.2 cm, Width 34.2 cm, Length 39.5 cm
• Weight: 9.8 kg
• Models: Available in 115 V, 230 V, 230 V UK, and 230 V AUS
• Frequency: 30 Hz to 10 MHz (-3 dB) for instrumentation; 30 Hz to 2.5 MHz (-3 dB) with loads
• Current: 20 mA to 2200 mA
• Current Accuracy: 20 to 2200 mA ± 2% of reading
• Load Resistance: 10 to 5200 ohms in increments
• Crest Factor: 1.4 to 16 (V peak voltage / V RMS)
• Foot Switch Output: Triggers measurement after a programmed delay of 200 ms to 4000 ms
• Peak-to-Peak Voltage: 0 to 10 kV (closed load)
• Volt-Hertz Product: 10^9
• Oscilloscope Output: 5 V/A uncalibrated, minimum 100 mA RF input