Gaz Analyzer M1019A IntelliVue G5 - Good Condition

An Advanced Gas Analyzer for Precise Monitoring 

The Philips IntelliVue G5 (M1019A) is a state-of-the-art medical device designed to monitor respiratory gases in patients under general anesthesia or in the recovery phase. With its advanced infrared technology, it accurately measures the concentrations of carbon dioxide (CO2​), nitrous oxide (N2O), oxygen (O2​), and up to two volatile anesthetic agents. This gas analyzer is an essential tool for healthcare professionals, providing real-time data for optimal patient care.

The IntelliVue G5 stands out for its ability to deliver precise and reliable measurements, even in demanding hospital environments. It is equipped with sophisticated sensors and a software-controlled pump system, ensuring a constant and reliable sample flow. The device also features an effective water trap system that removes liquids from the gas sample, ensuring accurate and reliable measurements.

The IntelliVue G5 is designed to be easy to install and use. It can be mounted on a variety of supports, including wall mounts, ceiling mounts, and table mounts. The device is also equipped with an RS232 serial port, allowing for easy integration with other patient monitoring systems.

In terms of safety, the IntelliVue G5 complies with international safety standards for medical electrical equipment, including IEC 60601-1 and EN 60601-1. It is also protected against the effects of defibrillation and electrosurgery, ensuring safe use in hospital environments.

The IntelliVue G5 is also designed to be easy to maintain. It features an automatic calibration system that ensures the device always operates at optimal performance levels. The device is also equipped with an integrated diagnostic system that alerts users to potential issues.

The Philips IntelliVue G5 (M1019A) is an advanced gas analyzer that provides precise and reliable monitoring of respiratory gases in patients. With its advanced infrared technology, ease of installation and use, and compliance with international safety standards, it is an essential tool for healthcare professionals in demanding hospital environments.

• Dimensions (H × W × D) : ≤ 93 × ≤ 306 × 232 mm
• Weight : Less than 4 kg 
• Operating Temperature : 10 to 40°C (50 to 104°F)
• Storage Temperature : -20 to 65°C (-4 to 149°F)
• Operating Humidity : 5 to 90% RH, max 40°C (104°F), non-condensing
• Storage Humidity : 5 to 95% RH, max 65°C (149°F), non-condensing
• Operating Altitude : -305 to 2900 m (-1000 to 9515 ft)
• Storage Altitude : -305 to 5000 m (-1000 to 16404 ft)
• Warm-up Time : 1-2 minutes to measure CO2​, less than 6 minutes for full accuracy
• Sample Flow Rate : 200 ml/min ± 20
• Sample Delay Time : 5 seconds for all measurements and alarms
• MDD Classification : Class 2A, Rule 10
• Humidity Correction : Wet or dry for CO2​
• Measurement Accuracy :
  • CO2​: ± 0.5 vol% or 12% relative
  • N2OO: ± 2.0 vol% + 8% relative
  • O2: ± 3 vol%
  • Anesthetic Agents : ± 0.15 vol% + 15% relative
• Measurement Resolution :
  • CO2: 1 mmHg
  • N2O: 1 vol%
  • O2: 1 vol%
  • Anesthetic Agents : 0.05 vol%
• Rise Time :
  • CO2: 350 ms typical
  • N2O: 500 ms typical
  • O2: 500 ms typical
  • Anesthetic Agents : ≤ 500 ms