• Medical Diagnostic Equipment
  • Surgical and Therapeutic Equipment
  • Medical Furniture
  • Laboratory Equipment
  • Cleaning and Sterilization
  • Spare Parts

Minisart SRP PTFE Syringe Filter - Perfect Condition

Categories: Spare Parts

The Minisart® SRP syringe filter from Sartorius is designed for demanding filtration applications involving solvents, gases, acids or bases. Featuring a hydrophobic PTFE membrane, it offers excellent chemical compatibility with a wide range of aggressive liquids, while ensuring effective particle retention. Its polypropylene (PP) construction withstands operating pressures of up to 4.5 bar. Available in different diameters (4 mm, 15 mm, 25 mm), it is suitable for various sample volumes. The Minisart® SRP is a reliable and high-performance tool for medical laboratories requiring precise and controlled filtration.



Offer Details

Options :

Sartorius Spritzenvorsatzfilter Minisart SRP25 PTFE 25 mm 0,45 µm unsteril 50Stk

The Offer Details are provided by the seller and automatically translated.

Description

Precise Medical Filtration for Aggressive Liquids and Ventilation Applications: Minisart® SRP by Sartorius

The Minisart® SRP syringe filter is a filtration solution specially designed to meet the requirements of medical and pharmaceutical environments where the filtered liquids are highly chemically aggressive or must be ventilated without humidification. This model is based on a hydrophobic PTFE (polytetrafluoroethylene) membrane, ideal for treating pure solvents, gases, acids and bases. Thanks to this membrane, the filter offers high chemical resistance, even to substances such as methanol, acetone, chloroform and DMSO.

The filter body is made of polypropylene (PP), a robust material that guarantees the mechanical stability of the assembly, even under pressure. The structure is designed to withstand operating pressures of up to 4.5 bar, with a burst pressure exceeding 7 bar. This ensures enhanced reliability during critical procedures such as solution preparation or gas filtration in medical applications.

The Minisart® SRP is available in three diameters: 4 mm, 15 mm and 25 mm, each offering a filtration surface area suited to the volumes to be treated. It is therefore suitable for both small quantities (less than 1 mL) and larger volumes up to 200 mL. The models are equipped with standard connectors, mainly male Luer outlets, ensuring compatibility with common medical devices.

This filter is non-sterile but can be sterilised by autoclave or ethylene oxide (EO), making it particularly practical for medical establishments with their own sterilisation chain. It is also compatible with sterility testing according to the BCT protocol (Brevundimonas diminuta ≥ 10⁷ cfu/cm²) for 0.2 µm pore size versions.

The Minisart® SRP is a reliable choice for filtering complex or potentially aggressive fluids in demanding medical settings. It offers safety, performance and compatibility with professional filtration standards without compromising process stability or efficiency.

Features

  • Hydrophobic PTFE membrane suitable for gas and solvent filtration
  • High chemical compatibility with a wide range of corrosive liquids
  • High pressure resistance for maximum safety in the laboratory
  • Compatible with autoclave or EO sterilisation protocols
  • Can be used in ventilation or for degassing without water contamination
  • Optimised flow rates according to diameter and solvent used
  • Sterile or non-sterile versions available

Technical Details

4 mm – Porosity 0.2 µm:

  • Filtration area: 0.07 cm²
  • Residual volume after purging: < 10 µL
  • Membrane material: Hydrophobic PTFE
  • Housing material: Polypropylene (PP)
  • Flow rate (at 1 bar): Water: not applicable (hydrophobic membrane, requires pre-humidification); Methanol: not available
  • Flow rate (air at 0.1 bar): ≥ 30 mL/min
  • Water penetration point: ≥ 4.0 bar (58 psi)
  • Max. operating pressure: 4.5 bar (65 psi)
  • Burst pressure: ≥ 7 bar (102 psi)
  • Max. temperature: 60 °C
  • Sterilisable: Autoclave or EO
  • Sterile filtration according to BCT: Yes

---

4 mm – Porosity 0.45 µm:

  • Filtration area: 0.07 cm²
  • Residual volume after purging: &lt; 10 µL
  • Membrane material: Hydrophobic PTFE
  • Housing material: Polypropylene (PP)
  • Flow rate (at 1 bar): Water: not applicable; Methanol: not available
  • Flow rate (air at 0.1 bar): ≥ 60 mL/min
  • Water penetration point: ≥ 3.0 bar (44 psi)
  • Maximum working pressure: 4.5 bar (65 psi)
  • Burst pressure: ≥ 7 bar (102 psi)
  • Max. temperature: 60 °C
  • Sterilisable: Autoclave or EO
  • Sterile filtration according to BCT: No

---

15 mm – Porosity 0.2 µm:

  • Filtration area: 1.7 cm²
  • Residual volume after purging: &lt; 100 µL
  • Membrane material: Hydrophobic PTFE
  • Housing material: Polypropylene (PP)
  • Flow rate (at 1 bar): Methanol: ≥ 55 mL/min
  • Flow rate (air at 0.1 bar): ≥ 800 mL/min
  • Water penetration point: ≥ 4.0 bar (58 psi)
  • Max. operating pressure: 4.5 bar (65 psi)
  • Burst pressure: ≥ 7 bar (102 psi)
  • Max. temperature: 60 °C
  • Sterilisable: Autoclave or EO
  • Sterile filtration according to BCT: Yes

---

15 mm – Porosity 0.45 µm:

  • Filtration area: 1.7 cm²
  • Residual volume after purging: &lt; 100 µL
  • Membrane material: Hydrophobic PTFE
  • Housing material: Polypropylene (PP)
  • Flow rate (at 1 bar): Methanol: ≥ 150 mL/min
  • Flow rate (air at 0.1 bar): ≥ 1600 mL/min
  • Water penetration point: ≥ 3.0 bar (44 psi)
  • Max. operating pressure: 4.5 bar (65 psi)
  • Burst pressure: ≥ 7 bar (102 psi)
  • Max. temperature: 60 °C
  • Sterilisable: Autoclave or EO
  • Sterile filtration according to BCT: No

---

25 mm – Porosity 0.2 µm:

  • Filtration area: 4.8 cm²
  • Residual volume after purging: &lt; 200 µL
  • Membrane material: Hydrophobic PTFE
  • Housing material: Polypropylene (PP)
  • Flow rate (at 1 bar): Methanol: ≥ 160 mL/min
  • Flow rate (air at 0.1 bar): ≥ 1800 mL/min
  • Water penetration point: ≥ 4.0 bar (58 psi)
  • Max. operating pressure: 4.5 bar (65 psi)
  • Burst pressure: ≥ 7 bar (102 psi)
  • Max. temperature: 60 °C
  • Sterilisable: Autoclave or EO
  • Sterile filtration according to BCT: Yes

---

25 mm – Porosity 0.45 µm:

  • Filtration area: 4.8 cm²
  • Residual volume after purging: < 200 µL
  • Membrane material: Hydrophobic PTFE
  • Housing material: Polypropylene (PP)
  • Flow rate (at 1 bar): Methanol: ≥ 260 mL/min
  • Flow rate (air at 0.1 bar): ≥ 3000 mL/min
  • Water penetration point: ≥ 3.0 bar (44 psi)
  • Max. operating pressure: 4.5 bar (65 psi)
  • Burst pressure: ≥ 7 bar (102 psi)
  • Max. temperature: 60 °C
  • Sterilisable: Autoclave or EO
  • Sterile filtration according to BCT: No

Compatible Accessories

  • Standard Luer-compatible syringes
  • Luer Lock adapter connectors
  • Prefilters for heavily contaminated liquids
  • Barb-type outlet fittings for specific applications
  • Steam or EO sterilisation stations

Logistics

Remma and its partners provide you with serviced and configured equipment tailored to your needs. Receive your product at your facility with standard or express delivery, and an installation option, all through a single point of contact.

Warranty

Our 12/24-month warranty ensures the safety and reliability of your medical equipment throughout its lifespan.

Flexible Financing

Settle your medical equipment in up to 36 installments with our financing service or pay after delivery with Remma Facility.