• Medical Diagnostic Equipment
  • Surgical and Therapeutic Equipment
  • Medical Furniture
  • Laboratory Equipment
  • Cleaning and Sterilization

Stainless steel calibration weights Class M1

Zwiebel's M1 class stainless steel calibration weights are specially designed for M2 class weight calibration or verification and for use with class III weighing instruments. Manufactured in accordance with OIML R111, these weights guarantee excellent stability and reliable accuracy. Their monobloc construction (up to 50 g) or sealed cavity construction (from 100 g) ensures high robustness and perfect traceability. Available from 1 g to 10 kg, additional accessories are available: gloves, storage cases and optional COFRAC calibration certificate.



Description

Class M1 stainless steel calibration weights: French excellence at the service of metrological precision

ZWIEBEL's range of M1 class stainless steel calibration weights is part of a tradition of excellence and rigour at the service of professionals in metrology, quality control and demanding laboratories. Manufactured from high-density stainless steel (8000 ± 150 kg/m³), these weights comply with the OIML R111 recommendation and meet the requirements of accuracy class M1, used for the calibration or verification of class M2 weights, as well as for class III weighing instruments (medium accuracy).

The 1 g to 50 g models are designed as single-piece weights with no adjustment cavity, ensuring maximum mass stability and perfect structural integrity. From 100 g upwards, the weights are equipped with a sealed adjustment cavity, allowing precise adjustment during manufacture or recalibration. All weights are individually identified, ensuring full traceability within a quality system.

The fine machining and low surface roughness (Rz < 5 µm, Ra < 1 µm) limit the adhesion of particles or dust, which helps to maintain the accuracy of the weight over time. In addition, residual magnetisation is less than 250 µT, ensuring compatibility with the most sensitive measuring instruments.

This series of weights covers a wide range of nominal values, from 1 g to 10 kg, with dimensions, tolerated masses and finishes adapted to each level of use. Their French manufacture by ZWIEBEL guarantees a high level of quality, validated by extensive experience in the field of metrology.

The ZWIEBEL stainless steel M1 series is an essential reference for all professionals looking for a reliable, accurate and durable weighing solution that complies with international metrology standards. It is the ideal choice for calibrating scales, checking secondary weights or performing regular quality controls, with the guarantee of a product designed and manufactured in France to the highest standards.

Features

  • Compliant with OIML R111 standards
  • Available in a single-piece version (1 g to 50 g)
  • Sealed adjustment cavity for weights ≥ 100 g
  • Marking and identification for traceability
  • Polished surface with low roughness to prevent particle adhesion
  • Corrosion resistant thanks to stainless steel
  • Low residual magnetism
  • Compatible with Class III scales
  • COFRAC calibration option

Technical Details

  • Weight 1 g (reference: 101 4612)
    • Accuracy class: M1 (compliant with OIML R111)
    • Material: Stainless steel
    • Type: Monobloc, without adjustment cavity
    • Diameter (Ø A): 6.0 mm
    • Height (B): 6.2 mm
    • Base (C): 2.8 mm
    • Maximum permissible error (MPE): ±1.0 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³
    • Residual magnetisation: < 250 µT
    • Traceability: Individually identified weight

---

  • Weight 2 g (reference: 102 4612)
    • Accuracy class: M1
    • Material: Stainless steel
    • Type: Monobloc, without adjustment cavity
    • Diameter (Ø A): 6.0 mm
    • Height (B): 10.8 mm
    • Base (C): 2.8 mm
    • EMT: ±1.2 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³
    • Magnetisation: < 250 µT
    • Identification: Yes

---

  • Weight 5 g (reference: 103 4612)
    • Accuracy class: M1
    • Material: Stainless steel
    • Type: Monobloc
    • Ø A: 8.0 mm
    • B: 14.9 mm
    • C: 3.9 mm
    • EMT: ±1.6 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³
    • Magnetisation: < 250 µT
    • Traceability: Yes

---

  • Weight 10 g (reference: 104 4612)
    • Class: M1
    • Material: Stainless steel
    • Type: Monobloc
    • Ø A: 10.0 mm
    • B: 18.4 mm
    • C: 4.6 mm
    • EMT: ±2.0 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³
    • Magnetisation: < 250 µT
    • Identification: Present

---

  • Weight 20 g (reference: 105 4612)
    • Class: M1
    • Stainless steel
    • Single piece
    • Ø A: 13.0 mm
    • B: 21.8 mm
    • C: 5.6 mm
    • EMT: ±2.5 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³
    • Magnetisation: < 250 µT

---

  • Weight 50 g (reference: 106 4612)
    • Class: M1
    • Material: Stainless steel
    • Single piece
    • Ø A: 18.0 mm
    • B: 28.8 mm
    • C: 8.0 mm
    • EMT: ±3.0 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³

---

  • Weight 100 g (reference: 107 4612)
    • Class: M1
    • Material: Stainless steel
    • With lead-sealed adjustment cavity
    • Ø A: 22.0 mm
    • B: 38.2 mm
    • C: 11.0 mm
    • EMT: ±5.0 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm
    • Density: 8000 ± 150 kg/m³

---

  • Weight 200 g (reference: 108 4612)
    • Class: M1
    • Stainless steel
    • Sealed adjustment cavity
    • Ø A: 28.0 mm
    • B: 47.0 mm
    • C: 12.5 mm
    • EMT: ±10 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm

---

  • Weight 500 g (reference: 109 4612)
    • Class: M1
    • Stainless steel, adjustment cavity
    • Ø A: 38.0 mm
    • B: 64.0 mm
    • C: 17.0 mm
    • EMT: ±25 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm

---

  • Weight 1 kg (reference: 201 4612)
    • Class: M1
    • Stainless steel
    • Lead-filled cavity
    • Ø A: 48.0 mm
    • B: 80.5 mm
    • C: 22.0 mm
    • EMT: ±50 mg
    • Roughness: Rz < 5 µm / Ra < 1 µm

---

  • Weight 2 kg (reference: 202 4612)
    • Class: M1
    • Material: Stainless steel
    • Adjustable cavity
    • Ø A: 60.0 mm
    • B: 101.7 mm
    • C: 28.0 mm
    • EMT: ±100 mg

---

  • Weight 5 kg (reference: 203 4612)
    • Class: M1
    • Stainless steel
    • Lead-lined cavity
    • Ø A: 80.0 mm
    • B: 145.0 mm
    • C: 37.0 mm
    • EMT: ±250 mg

---

  • Weight 10 kg (reference: 204 4612)
    • Class: M1
    • Stainless steel
    • Adjustment cavity
    • Ø A: 100.0 mm
    • B: 181.7 mm
    • C: 47.0 mm
    • EMT: ±500 mg

Compatible Accessories

  • Cotton gloves for clean handling
  • Plastic storage case
  • High-end wooden case

Discover more in this category

Logistics

Remma and its partners provide you with serviced and configured equipment tailored to your needs. Receive your product at your facility with standard or express delivery, and an installation option, all through a single point of contact.

Warranty

Our 12/24-month warranty ensures the safety and reliability of your medical equipment throughout its lifespan.

Flexible Financing

Settle your medical equipment in up to 36 installments with our financing service or pay after delivery with Remma Facility.